Expedition 4WD V8-4.6L SOHC VIN W (1999)
Heater Hose: Service and Repair
Rear Auxiliary Heater Inlet Line
REMOVAL
1. Drain the cooling system.
2. Remove the quarter trim panel access cover.
3. Disconnect the heater inlet hose coupling.
4. Remove the auxiliary A/C line grommet retainer.
1
Remove the bolts.
2
Remove the retainer.
5. Remove the spare tire.
6. Turn the air suspension switch off, if equipped.
7. Raise and support the vehicle.
8. Lower the muffler heat shield.
1
Remove the two front bolts.
2
Lower the heat shield.
