Expedition 4WD V8-4.6L SOHC VIN W (1999)
11. Install the muffler heat shield.
1
Position the shield.
2
Install the nuts.
12. Lower the vehicle.
13. Turn on the air suspension switch, if equipped.
14. Install the grommet seal and retainer.
NOTE: Verify that the lines are entering through the center of the floor opening and that the retainer locating marks are positioned correctly.
15. Connect the heater inlet hose coupling.
16. Install the quarter trim access panel.
17. Install the spare tire.
18. Fill the cooling system.