Expedition 4WD V8-4.6L SOHC VIN W (1999)
15
Rear auxiliary heater inlet line
16
Rear auxiliary heater outlet line
17
Rear auxiliary evaporator outlet line
18
Rear auxiliary evaporator inlet line
19
Yellow tape
20
Rear auxiliary evaporator inlet line
21
Rear auxiliary evaporator outlet line
22
Rear auxiliary evaporator outlet line
23
Rear auxiliary evaporator inlet line
24
Rear auxiliary evaporator inlet line
25
Rear auxiliary heater outlet line
26
Rear auxiliary heater inlet line
27
Rear auxiliary heater inlet line
28
Rear auxiliary heater outlet line
29
Front auxiliary heater outlet line
30
Front auxiliary heater outlet line
-
The illustration shows the Multiple-Piece Auxiliary A/C Heater Line Kit.
1. Install the heater outlet line.
^
Starting from the rear of the vehicle, install the end with the blue tape over the axle between the frame and the body.
2. Connect the heater outlet line peanut fitting.
1
Connect the outlet lines.
2
Loosely install the nut.
3. Install the heater outlet line.
^
Starting from the rear of the vehicle, install the end with the red tape between the frame and the floor pan.
