Expedition 4WD V8-4.6L SOHC VIN W (1999)
9. Remove the four line bracket retaining nuts.
10. Remove the four line brackets by inserting a screwdriver in the stud hole and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
11. Disconnect the 5/8 inch outlet line peanut fitting that is located outboard of the side rail.
1
Remove the nut.
2
Disconnect the line.
12. Cut the 5/8 inch evaporator cutlet line near the A/C line grommet.