Expedition 4WD V8-4.6L SOHC VIN W (1999)
^
Starting from the rear of the vehicle install the end with the violet tape over the frame crossmember and between the main member and the
muffler heat shield.
4. Correct the outlet line peanut fitting to the outlet line.
1
Connect the outlet lines.
2
Loosely install the nut.
5. Install the outlet line.
^
Starting from the rear of the vehicle, install the end with the yellow tape between the frame and the muffler heat shield.
6. Connect the outlet line peanut fitting to the outlet line.
^
Connect the fitting and loosely install the nut.
7. Install the outlet line.
1
Remove the RH rear wheel and tire.
