Expedition 4WD V8-4.6L SOHC VIN W (1999)
12. Install the line brackets.
1
Position tile bracket.
2
Install the nut.
3
Snap the line securely into the bracket.
CAUTION: Overtightening of the nut will cause the stud to break away from the floor pan.
NOTE: The bracket must be positioned equally between the white location marks on the line.
13. Install the muffler heat shield.
1
Position the shield
2
Install the nuts.
14. Lower the vehicle.
15. Turn the air suspension switch on, if equipped.
16. Connect the outlet line to the auxiliary evaporator case line.
17. Install the grommet seal and retainer.
NOTE: Maker sure that the lines are entering through the center of the floor opening and that the retainer locating marks are positioned correctly.
18. Install the quarter trim access panel.
19. Evacuate and charge the A/C system. See: Heating and Air Conditioning/Service and Repair/Evacuation and Charging
20. Install the spare tire.
