Expedition 4WD V8-4.6L SOHC VIN W (1999)
NOTE: Wait for the solder to cool before moving the wires.
5. Position the (A) heat shrink tube over the (B) wire repair,
^
Overlap the heat shrink tube on both wires.
6. Use Heat Gun to heat the repaired area until adhesive flows out both ends of the heat shrink tube.
7. Reconnect the battery ground cable.
NOTE: when the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
