Expedition 4WD V8-4.6L SOHC VIN W (1999)
5. If required, remove the Evaporative Emissions Canister (EVAP canister).
1
Remove the bolt.
2
Remove the bracket.
6. If required, remove the retainer.
^
Slide the retainer off the bracket.
7. Remove the evaporative emissions canister vent solenoid.
NOTE
^
Inspect and replace the O-ring as necessary.
^
A twisting and pulling motion is required to remove the evaporative emissions canister vent solenoid.
8. Remove canister inlet fitting.
NOTE
^
Inspect and replace the O-ring as necessary.
