Expedition 4WD V8-4.6L SOHC VIN W (1999)
28.
Unclip both of the rear fuel lines from the front clip. See Figure 5.
29.
Remove both of the rear fuel lines from the vehicle.
30.
Position the new rear fuel supply line (blue convolute) on the vehicle.
31.
Clip the rear fuel supply line in the front and back clips.
32.
Position the new rear fuel return line (gray convolute) on the vehicle.
33.
Clip the rear fuel return line in the front and back clips.
34.
Connect the rear fuel lines to the fuel pump. Reattach the safety clips.
35.
Raise the fuel tank to the installed position.
36.
Install the fuel tank straps. Tighten the retaining bolts to 55 Nm (40 lb-ft).
37.
Remove the adjustable jack.
38.
Connect the fuel filler hose to the fuel tank.
39.
Connect the rear fuel supply line to the fuel filter. Reattach the safety clip.
40.
Position the front fuel supply line on the vehicle.
41.
Clip the front fuel supply line in the front, middle and back clips.
42.
Connect the front fuel supply line to the fuel filter. Reattach the safety clip.
43.
Position the front fuel return line on the vehicle.
44.
Clip the front fuel return line in the front, middle and back clips.
