Expedition 4WD V8-4.6L SOHC VIN W (1999)
6. Remove the anti-theft transceiver module.
1
Remove the screw from the bottom of the transceiver module.
2
Disconnect the electrical connector and remove the module.
NOTE: Only apply pressure or leverage below the key cylinder lower rib.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
