Expedition 4WD V8-4.6L SOHC VIN W (1999)
4. Remove the front crash sensor.
1
Remove the screws.
2
Remove the air bag sensor.
INSTALLATION
1. Follow the removal procedure in reverse order.
WARNING: Vehicle sensor orientation is critical for proper system operation. If a vehicle equipped with an air bag supplemental
restraint system (SRS) is involved in a collision, inspect the sensor mounting bracket and wiring pigtail for deformation. Replace and
properly position the sensor or any other damaged supplemental restraint system (SRS) components whether or not the air bag is
deployed.
NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the
diagnostic procedure again.
2. Prove out the air bag system.
