ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Bleeding|Service and Repair|Page 6935 > < Pitman Arm|Specifications
Page 1
background image

Power Steering Bleeding: Service and Repair

Special Tools

NOTE:  If the air is not purged from the power steering system correctly, pump failure could result. This condition can occur on pre-delivery vehicles
with evidence of aerated fluid or on vehicles that have had steering component repairs.

A whine heard from the power steering pump may be caused by air in the system. The power steering purging procedure must be performed under the
following conditions:
-

Prior to any component repair for which power steering noise complaints are accompanied by evidence of aerated fluid.

-

After replacement of any power steering system component (gear, hose, etc.).

1. Remove the power steering fluid reservoir cap.

2. Tightly insert the stopper of the special tool into the power steering fluid reservoir.
3. Start the engine and allow it to idle.

Power Steering Bleeding|Service and Repair|Page 6935 > < Pitman Arm|Specifications