Expedition 4WD V8-4.6L SOHC VIN W (1999)
3. Install the front stabilizer bar link to the front suspension lower arm.
4. Install the front shock absorber lower bolt and nut to the front suspension lower arm.
5. Load the torsion bar.
1
Install the torsion bar adjuster.
-
Turn the torsion bar adjuster until the reference marks align.
2
Install the Torsion Bar Tool with the Torsion Bar Tool Adapters in the B slots on the Torsion Bar Tool.
3
Tighten the Torsion Bar Tool to load the torsion bar.
4
Install the torsion bar adjuster nut.
5
Install the torsion bar adjuster bolt.
6
Remove Torsion Bar Tool.
6. Install the wheel hub.
7. Adjust the ride height.