Expedition 4WD V8-4.6L SOHC VIN W (1999)
Control Arm: Service and Repair
Upper
Special Tool(s)
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. CAUTION: Do not use heat to loosen a seized lug nut. Heat can damage the wheel and wheel bearings.
Remove the wheel and tire assembly.
3. Support the front suspension lower arm.
-
Position a jack under the front suspension lower arm.
4. Mark the position of the camber adjustment cam.
5. Safely reposition the anti-lock sensor wire.
1
Remove the bolt.
2
Safely reposition the anti-lock sensor wire.
