Expedition 4WD V8-4.6L SOHC VIN W (1999)
Suspension Control Module: Service and Repair
Removal
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Remove the instrument panel cluster panel.
3. Remove the air suspension control module screws.
4. Remove the air suspension control module and bracket assembly.
1
Disconnect the electrical connectors.
2
Remove the air suspension control module and bracket assembly.
Installation
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
NOTE: Ale air suspension control module is calibrated with information from the ride height sensor. A new or exchanged air suspension control
module requires that the ride height adjustment calibration process be performed - Clear B2140 DTC.
To install, reverse the removal procedure.
