Expedition 4WD V8-4.6L SOHC VIN W (1999)
5. Remove the lower shock absorber nut, bolt and the shock absorber.
Installation
1. WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub or brake disc that contacts the wheel. Installing wheels without proper metal-to-metal contact at the wheel mounting surfaces
can cause the lug nuts to loosen and allow the wheel to come off while the vehicle is in motion, causing loss of control.
NOTE: Tighten the lug nuts in the sequence indicated in the illustration.
Follow the removal procedure in reverse order.