Expedition 4WD V8-4.6L SOHC VIN W (1999)
Installation
NOTE: This is not an ordinary installation procedure and does not compensate for band wear.
1. NOTE: Lubricate the reverse piston seal to facilitate assembly and prevent damage to the seal.
Install the reverse servo piston and return spring.
^
Do not install the piston cover.
2. Install the Servo Piston Selection Tool and tighten the band apply bolt.
3. Attach the Dial Indicator With Bracketry.
^
Position the indicator stem on the flat portion of the reverse servo piston and zero the dial indicator.
4. Loosen the bolt until the piston stops against the tool.
