Expedition 4WD V8-4.6L SOHC VIN W (1999)
14. Remove the bearing caps anal bolts.
^
To establish differential bearing preload, increase both left and right shim sizes by the specification shown in the illustration.
^
Using the special tool, ensure the differential bearing shims are fully seated and the assembly turns freely.
15. CAUTION: Mark the position of the bearing caps as arrows may not be visible. The bearing caps must be installed in their identical
locations and positions.
Install the bearing caps and bearing cap bolts.
16. Using the special tool, recheck the backlash.
17. Install the shafts.
Conventional