Expedition 4WD V8-4.6L SOHC VIN W (1999)
16. NOTE: Start two of the ring gear bolts through the differential case and into the ring gear to make sure the ring gear bolt holes align with the
differential case bolt holes correctly.
Install the anti-lock speed sensor ring by aligning the tab on the anti-lock speed sensor ring with the slot on the differential case.
17. CAUTION: Make sure that the notches on the case flange and the anti-lock speed sensor ring are aligned.
Press the new anti-lock speed sensor ring and the ring gear on the differential case.
18. Install the ring gear bolts.
^
Apply Stud and Bearing Mount E0AZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the ring gear bolts.
19. Install the differential case.
