Expedition 4WD V8-4.6L SOHC VIN W (1999)
Universal Joint: Service and Repair
Disassembly and Assembly
Double Cardan
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft in a vise or similar holding fixture.
Place the driveshaft on a suitable workbench.
3. NOTE: If components are not marked and installed correctly, driveline imbalance can occur.
Mark the positions of the driveshaft components.
4. Clamp the U-Joint Tool in a vise.
5. Remove the eight snap rings.
