Expedition 4WD V8-4.6L SOHC VIN W (1999)
10. Remove the inner race and ball cage.
11. Remove the inboard front wheel halfshaft joint boot and the clamp protector.
12. Remove the two outboard boot clamps.
1
Remove the outboard clamp protectors.
2
Grip the boot clamps and peel the clamps away from the boot.
13. Remove the outboard front wheel halfshaft joint boot.
14. Inspect for contaminated grease.
15. If grease is contaminated, clean and inspect the joint for wear. Replace the outboard CV joint and interconnecting shaft assembly if worn or
damaged.
Assembly