Expedition 4WD V8-4.6L SOHC VIN W (1999)
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washers on the button ends of the axle shafts.
2
Pull the axle shafts outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer E0AZ-19554-AA or equivalent meeting Ford
specifications WSK-M2G315-A5 and ESE-M4G204-A2 prior to installation.
Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the case lock bolt hole.
2
Install a new differential pinion shaft lock bolt.
5. Install the brake discs.
6. Install the differential housing cover and fill the rear axle housing with the correct amount of specified lubricant.
7. Install the tire and wheel assembly.
8. Lower the vehicle.
