Expedition 4WD V8-4.6L SOHC VIN W (1999)
Transmission Position Switch/Sensor: Service and Repair
Special Tools
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. CAUTION: Do not pry on the swivel tube to disconnect the transmission shift linkage.
Disconnect the manual lever shift control cable.
4. Disconnect the digital TR electrical connector.
5. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the nut.
2
Remove the lever.
6. Loosen the digital TR bolts.
7. NOTE: Manual shift lever must be in the neutral position.
