Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Keyless Entry Key-Pad: Service and Repair
Remote Keyless Entry Keypad Code Programming
REMOTE KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory remote keyless entry (RKE) keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases
the stored customer code. The door locks will lock, then unlock, confirming the code is erased. The existing code does not need to be erased to
program a new code.
3. Within 5 seconds, enter the new 5-digit RKE keypad code. The doors lock and unlock to confirm the new code is programmed.
