Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Front Door Panel: Service and Repair
FRONT DOOR TRIM PANEL
Removal and Installation
NOTE: Left front door shown, right front similar.
1. Remove the window control switch plate.
-
Use service notch and disconnect the electrical connectors.
2. Remove the door handle bezel.
-
Use service notch.
3. CAUTION: To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the
panel clips.
Remove the two bolts and three screws, and remove the door trim panel.
-
Remove the finish cover to access the two center screws.
-
Disconnect the electrical connectors.
4. To install, reverse the removal procedure.