Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Trim Panel: Service and Repair
D-Pillar Trim Panel
D-PILLAR TRIM PANEL
Removal and Installation
NOTE: Right side with power vent windows and power liftgate shown, all others similar.
1. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide cover.
Remove the safety belt guide.
-
Lift up on the cover and remove the nut.
2. Remove rear upper headliner trim panel.
3. Remove the D-pillar trim panel.
1
Disengage the upper clip by pulling downward.
2
Unseat the D-pillar trim panel and rotate forward to remove.
4. To install, reverse the removal procedure.
