Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
11. Remove the rear door scuff plate by pulling upward.
12. NOTE: The seat back must not be folded completely down, as the quarter trim panel will not have enough clearance to be removed.
Fold the seat back of the third row seat downward so that the top edge of the seat back is positioned within approximately 203 mm (8 in) of the
full down position.
13. Remove the rear quarter trim panel.
-
Disengage the rear clip on the base of the trim panel first, by pulling the bottom rear edge toward the center of the vehicle.
-
Disengage the remaining clips.
-
If equipped, disconnect the power point and power third row seat switch electrical connector at the rear.
14. To install, reverse the removal procedure.
