Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Sunroof / Moonroof Motor: Service and Repair
ROOF OPENING PANEL MOTOR
Removal
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including whenever the roof
opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new
roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. See: Service and Repair/Roof Opening Panel
Motor Initialization
1. Remove the headliner.
2. Disconnect the roof opening panel motor electrical connector and cut the tie strap.
3. Remove the roof opening panel motor.
-
Remove the three bolts.
Installation
1. Connect the roof opening panel motor electrical connector. Install a new tie wrap and trim off excess.