Roof and Associated Components: Sunroof Track Service and Repair
Sunroof / Moonroof Track: Service and Repair
ROOF OPENING PANEL REAR TROUGH GUIDE
Removal and Installation
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof
opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new roof
opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. See: Service and Repair/Roof Opening Panel Motor
Initialization
1. Remove the roof opening panel.
2. Remove the two trough guide retaining screws.
3. Remove the trough from the trough guide assembly.
4. Disconnect the trough guide rods from the lifter arm assemblies.
