Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
9. Remove the screws from the lumbar motor support cover and remove support cover (two shown).
10. Remove the lumbar motor cable from the lumbar support.
1
Flex the lumbar support.
2
Separate the lumbar support adjusting cable from the positioning spring.
3
Unhook the lumbar support adjusting cable from the lumbar support.
11. Remove the staples and open dampening bag.
12. Remove the power lumbar support motor.
1
Disconnect the power lumbar motor electrical connector.
2
Remove the screws.
3
Remove the power lumbar support motor.
