Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Power Seat Motor: Service and Repair
Power-Fold Seat Motor
POWER-FOLD SEAT MOTOR
Removal and Installation
CAUTION:
-
To prevent possible damage to the third row seat or the safety belts, make sure that the safety belts are not fastened when moving the seat
to the load floor position.
-
Make sure that no objects such as books, purses or briefcases are on the floor in front of the third row seats or on the seat cushion before
lowering the backrest(s).
NOTE:
-
The third row seat backrests need to be in the raised position for removal of the third row seats.
-
A cable assembly service kit is available.
-
60 percent seat shown, 40 percent similar.
All vehicles
1. Remove the rear load floor panel.
2. Remove the jack assembly.
3. Remove the load floor panel latch striker bolts and latch.