Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
5. Release the one hook-and-loop strip and the one J-clip.
6. Depress tab and remove the head restraint.
7. NOTE: The head restraint sleeve pins are not interchangeable. Note location for installation.
Reach up into the seat backrest and squeeze the head restraint sleeve ends together to release the sleeves and pull the head restraint sleeves out.
8. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam.
Invert the seat backrest trim cover and remove.
9. CAUTION: Use care when removing the seat backrest foam pad from the frame. The foam pad has hook and loop fasteners holding the
TED to the seat backrest foam pad.