Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
20. Install the safety belt buckle pretensioner.
1
Install the safety belt buckle pretensioner.
2
Install the nut.
21. Connect the safety belt buckle pretensioner and usage detection electrical connectors.
22. Install the inboard forward/reverse motor drive cable to seat track.
Driver seat
23. CAUTION: Make sure to remove all metal chips from seat position sensor and surrounding areas.
Install the seat position sensor.
1
Install the seat position sensor.
2
Install the rivet.
3
Connect the seat position sensor electrical connector.
Inboard and outboard seat tracks
