Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket-Adjustable
Brake Pedal and Bracket-Adjustable
Removal and Installation
1. CAUTION: The brake pedal and the accelerator pedal must be in the same position when installing a new cable or a new pedal. The pedals must
be all the way forward or all the way rearward.
Disconnect the battery.
2. CAUTION: The booster pushrod must be installed with the pushrod offset, if present, pointing downward.
Remove the stoplight switch self-lock pin and slide the stoplight switch, booster push rod and the bushing off the brake pedal pin.
3. Remove the accelerator pedal-to-brake pedal cable.
4. CAUTION: Do not install the speed control deactivator switch after detaching it from the brake pedal bracket.
Turn the speed control deactivation switch counterclockwise and detach it from the brake pedal bracket.