Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Brake Caliper: Service and Repair
Front
Brake Caliper Removal and Installation
Brake Caliper
Removal and Installation
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations.
Remove the wheel and tire assembly.
2. Remove the brake pads.
3. CAUTION: Install a new lining if worn to or past the specified thickness above the metal backing plate or rivets. Install new pads in complete
axle sets.
Inspect the pads for wear or contamination.
4. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
Disconnect the front brake hose.
^
Use new copper washers to connect the front brake hose.
5. Remove the disc brake caliper bolts.