Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Brake Pad: Service and Repair
Front
Brake Pads
Material
Material
Removal
1. CAUTION: Install a new lining if worn to or past the specified thickness above the metal backing plate or rivets. Install new pads in complete
axle sets.
If necessary, using a suitable suction device, remove the brake fluid in the master cylinder reservoir until it is half filled.
2. Remove the wheel and tire assembly.
3. Inspect the brake pads for wear or contamination.
4. CAUTION: If the anchor housing spring is to be reused, do not force the anchor housing spring off the brake caliper. Do not install a damaged
anchor housing spring.
Remove the anchor housing spring.
