Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
6. Measure the brake disc thickness.
^
Install a new brake disc (1125) if not within specification.
7. Inspect the disc brake caliper for leaks.
^
If leaks are found, the brake caliper must be disassembled.
8. Bleed the brake system.
9. To install, reverse the removal procedure.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
1. Remove the brake pads.
2. Remove the brake caliper anchor plate.
1. Remove the brake caliper anchor plate bolts.
2. Remove the brake caliper anchor plate.
3. To install, reverse the removal procedure.
Brake Caliper Disassembly and Assembly
DISASSEMBLY AND ASSEMBLY
Brake Caliper
Material
Material
Disassembly
1. Remove the disc brake caliper.
2. Drain the remaining brake fluid from the disc brake caliper.
3. Secure the disc brake caliper in a vise.
4. Remove the caliper pistons (2196).
1. Place a block of wood between the caliper bridge and the caliper pistons.
2. Apply low air pressure to the fluid port in the disc brake caliper.
3. Force out the caliper pistons to the block of wood.