Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Fan Clutch: Service and Repair
Cooling Fan-Blade, Clutch and Shroud Removal and Installation
Cooling Fan-Blade, Clutch and Shroud
Special Tools And Equipment
Special Tool(s)
Removal and Installation
1. Remove the air cleaner inlet pipe and resonator.
2. Remove the two bolts and the lower cooling fan shroud.
^
To install, tighten to 3 Nm (27 inch lbs.).
3. Remove the two bolts and the upper cooling fan shroud.
^
To install, tighten to 3 Nm (27 inch lbs.).
4. Using the special tools, remove the cooling fan assembly.
^
To install, tighten to 55 Nm (41 ft. lbs.).
^
If servicing the cooling fan or cooling fan clutch, refer to Cooling Fan and Fan Clutch.
5. To install, reverse the removal procedure.
