Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
10. NOTICE: Engine is not freewheeling. Camshaft procedure must be followed exactly or damage to valves and pistons will result.
NOTE: The Timing Chain Wedge tool must be installed square to the timing chain and the engine block.
NOTE: Engine front cover removed for clarity.
Install the special tool in the RH timing chain as shown.
11. NOTICE: Do not remove the Timing Chain Wedge tool at any time during assembly. If the special tool is removed or out of placement, the
engine front cover must be removed and the engine must be retimed. For additional information, refer to Timing Drive Components. See: Timing
Components
NOTICE: The timing chain must be installed in its original position onto the camshaft phaser and sprocket using the scribed marks, or damage to
valves and pistons will result.
Scribe a location mark on the timing chain and the camshaft phaser and sprocket assembly.
12. NOTICE: Remove the front thrust camshaft bearing cap straight upward from the bearing towers or the bearing cap may be damaged from side
loading.
