Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Verify the camshaft phaser and sprocket and timing chain scribe marks are still in alignment.
4. NOTE: Do not allow the camshaft roller followers to move out of position when installing the camshaft.
Install the camshaft bearing caps in their original locations.
-
Lubricate the camshaft bearing caps with clean engine oil.
-
Position the front camshaft bearing cap.
-
Position the remaining camshaft bearing caps.
-
Install the bolts loosely.
5. Tighten the bolts in the sequence shown.
-
Tighten to 10 Nm (89 lb-in).
6. NOTE: Engine front cover removed for clarity.
