Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Connecting Rod: Specifications
General Specifications
GENERAL SPECIFICATIONS
Connecting Rod
Connecting rod-to-pin clearance ............................................................................................................................. 0.009-0.0235 mm (0.0004-0.0093 in)
Connecting rod pin bore diameter ......................................................................................................................... 22.012-22.024 mm (0.8666-0.8671 in)
Connecting rod length (center-to-center) ......................................................................................................................................... 169.1 mm (6.6575 in)
Connecting rod maximum allowed bend ....................................................................................................................................... ± 0.038 mm (0.0015 in)
Connecting rod maximum allowed twist (see footnote b) ............................................................................................................... ± 0.05 mm (0.0020 in)
Connecting rod bearing bore diameter (with assembled liners) ............................................................................. 53.049-53.027 mm(2.0885-2.0877 in)
Connecting rod bearing-to-crankshaft clearance ....................................................................................................... 0.064-0.026 mm (0.0025-0.0010 in)
Connecting rod side clearance .................................................................................................................................. 0.475-0.125 mm (0.0187-0.0049 in)
Footnotes:
a
The time for the plunger to leak down 1.6 mm (0.062 in) of travel with 222 N force and leak-down fluid in the lash adjuster.
b
The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends
of a 203 mm bar, 105.5 mm on each side of rod centerline.
