Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
15. Remove the 3 bolts and the engine mount.
LH engine mount
16. If servicing the LH engine mount on a 4WD vehicle, remove the front driveshaft.
17. Remove the 3 bolts and the engine mount.
Installation
RH engine mount
1. CAUTION: Clean the engine mount-to-cylinder block and engine mount-to-chassis mating surfaces of any dirt or foreign material prior to
installation.
Position the RH engine mount and install the 3 bolts in the sequence shown.
^
Tighten to 63 Nm (46 ft. lbs.).
LH engine mount