Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
8. Install the front axle housing LH front mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
9. Install the front axle housing LH rear mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
All vehicles
10. Position the frame crossmember and the 4 bolts.
^
Tighten to 102 Nm (75 ft. lbs.).
11. Install the wire harness bracket and the bolt.
^
Tighten to 10 Nm (89 inch lbs.).
12. Fill the crankcase with clean engine oil.
