Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
4. Using the special tool, install the crankshaft pulley.
5. Using a new crankshaft pulley bolt, install the bolt and washer and tighten the bolt in 4 stages.
^
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
^
Stage 2: Loosen 360 degrees.
^
Stage 3: Tighten to 50 Nm (37 ft. lbs.).
^
Stage 4: Tighten an additional 90 degrees.
6. Rotate the tensioner clockwise and install the accessory drive belt.
7. Install the engine cooling fan lower shroud.
