Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
4. Tighten the engine front cover fasteners in sequence in 2 stages.
Stage 1: Tighten fasteners 1 through 15 to 25 Nm (18 ft. lbs.).
Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.).
5. Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
^
Stage 1: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 2: Tighten an additional 60 degrees.
6. Connect the CKP sensor electrical connector.
7. Position the power steering pump assembly and install the bolts.
^
Tighten to 25 Nm (18 ft. lbs.).
8. Position the power steering pressure hose support bracket and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
