Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Removal and Installation
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the air cleaner housing.
3. Remove the generator.
4. Remove the LH inner fenderwell.
5. Remove the upper radiator shroud.
6. CAUTION: Only use hand tools when removing the LH engine mount through bolt or damage to the cage nut can occur.
NOTE: If the LH engine mount through bolt nut is missing or damaged install a new nut using service part number W709375. If the LH engine
mount through bolt nut cage is damaged or missing, remove the cage and install a new nut using service part number W520516-S301.
Remove the LH engine support insulator bolt.
