Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
RH
TEMPERATURE BLEND DOOR ACTUATOR - RH
Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
2. Remove the temperature blend door actuator.
1
Disconnect the temperature blend door actuator electrical connector.
2
Remove the screws.
3
Remove the temperature blend door actuator.
3. To install, reverse the removal procedure.
LH
TEMPERATURE BLEND DOOR ACTUATOR - LH
Removal and Installation
1. Remove the plenum chamber.
2. Remove the screws and the floor duct.
3. Remove the temperature blend door actuator.