ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC's P2106 and P2135 Set|Page 7659 > < Engine Controls - MIL ON/DTC's P2106 and P2135 Set|Page 7657
Page 1
background image

Evaporator Case: Service and Repair

AUXILIARY CLIMATE CONTROL HOUSING

Removal and Installation

1. WARNING:  Do not open the cooling system while it is hot or while the engine is running. Failure to follow these instructions can result

in personal injury.

Recover the refrigerant.

2. Remove the RH quarter trim panel. Refer to:  Body and Frame, Interior Moulding/Trim, Trim Panel, Service and Repair, See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair

3. Detach the upper air duct from the auxiliary housing.

4. Remove the bolts and the auxiliary line bracket.

5. Disconnect the heater hoses.

1

Using suitable tools, clamp off the heater hoses.

2

Disconnect the heater hoses.

6. Disconnect the drain hose.

Engine Controls - MIL ON/DTC's P2106 and P2135 Set|Page 7659 > < Engine Controls - MIL ON/DTC's P2106 and P2135 Set|Page 7657