Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Headlamp Switch: Service and Repair
HEADLAMP SWITCH
Removal and Installation
All vehicles
1. Disconnect the battery ground cable.
Expedition
2. CAUTION: Cover the end of the tool with tape to prevent damage to the trim panel.
NOTE: Use a thin-bladed tool to remove the headlamp switch bezel assembly.
Remove the headlamp switch and bezel assembly.
-
Disconnect the electrical connectors.
Navigator
3. Remove the headlamp switch and bezel assembly.
-
Disconnect the electrical connectors.
4. Remove the screws, release the tabs and remove the headlamp switch.
All vehicles
5. To install, reverse the removal procedure.
