Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
4. Remove the 3 screws.
5. Disconnect the fuel tank filler pipe vent tube from the fuel pump module.
6. Loosen the hose clamp and disconnect the fuel tank filler pipe-to-fuel tank hose.
7. Disconnect the vapor tube from the evaporative emissions (EVAP) system dust separator.
8. Remove the two bolts from the fuel tank filler pipe support bracket.
-
To install, tighten to 15 Nm (11 lb-ft).
9. Remove the fuel tank filler pipe assembly.
10. To install, reverse the removal procedure.